Facebook Twitter Linkedin Google Plus Blog

Series CF ClearFloater™ Flotation Separator

Flotation Tank Design

The Series CF design has been developed to realize the full advantage of the extremely high rise velocities and stable float characteristic of flocculated solids having Suspended Air® bubbles attached. The inlet passes through an agitated flocculation chamber and flow to the flotation area is distributed evenly across the tank length. The skimmed surface is longer that it is wide. The solids are skimmed off immediately after reaching the surface. The unique durability of the float typically allows sufficient dewatering without allowing a mat of solids to build up. However, every ClearFloaterTM Flotation Separator skimming system is equipped with a variable frequency drive (VFD) motor for controlling the speed of the skimming rake and an on/off delay timer to allow for more dewatering should that additional effort be required. Skimmed solids area scraped up an inclined beach section to the discharge chute. Clarified effluent passes underneath a deep baffle, overflowing a full-width adjustable weir to the effluent receiving box.

Equipment Features and Options

Tank and Support Materials: 304 Stainless steel, minimum 12 gauge, welded construction.

Flocculation Chamber: Mechanically agitated compartment within the flotation tank, mixer shaft direct- driven by a variable speed gearmotor. Provides for effective blending of Suspended Air® Emulsion and additional polymer with influent coagulated/flocculated wastewater.

Mechanical Skimmer: Chain and flight, stainless steel fights and shaft, thermoplastic sprockets and pintle chain, with the drive sprocket direct driven by a variable speed gearmotor. Timed on/off cycle be supplied as an option.

Pacific Coast
Pacific Coast

( Click Image to Enlarge )

Sizing Series CF ClearFloater™ Flotation Separator

Model ClearFloaterTM Wastewater Flow Rating (gpm) a
ClearFloaterTM SAFTM Generator Recommended Minimum Recommended Maximum
CF25 F2 10 30
CF50 F8 20 100
CF125 F8 50 200
  F25 125 250
CF250 F25 200 350
  F50 250 500
CF500 F50 350 700
  F100 500 1,000
CF1000 F100 700 1,400
  F200 1,000 2,000
CF2000 F200 1,400 2,800
  F400 2,800 6,000
CF3000 F400 4,000 8,000

a. Maximum flow rates are dependent on constituent concentrations. Excessively high concentrations may require testing to size equipment.

Series CF ClearFloater™ Flotation Separator Dimensions

AREA (sq. ft.) W L H A B
CF50 8 5' 9' 7' 3 3
CF125 17.5 6' 10' 8' 4x(2)3 6
CF250 35 8' 12' 9' 6x(2)4 8
CF500 72 9' 18' 11' 8x(2)6 10
CF1000 144 12' 25' 13' 12x(2)8 12
CF2000 304 12' 44' 13' 14x(2)12 16 (2)
CF3000 432 12' 60' 13' 18x(2)12 18 (2)

( Click Image to Enlarge )

Back to Top